I've been getting quite a few PM's and messages in the Lynx SD thread asking about a Jaguar SD cartridge (Everdrive style), which I've hinted at in a few other places. I thought I'd just make it known that the design for a Jaguar SD cartridge is largely complete and I've started some actual work on it. Although the Lynx SD cartridge production is taking all my spare time at the moment, so until I've got that under control then progress will be slow. What I have got sorted is a good start, however. I've got a windows tool chain setup for the Jag. I have replaced the boot ROM with my own code and have hooked the Jag up to my trusty old SC1224. Next up is interfacing the Jag's DSP port to the PC via a microcontroller using the high speed synchronous serial interface. This will then let me actually do simple dev work on the Jag to test cartridge hardware. This is going to be a while yet, it could well take another 6-12 months depending on how much time I need to devote to the Lynx SD, as this is just a hobby for me, so my time is limited. There are no pre-order lists or anything like that, and I will ask for posts relating to this to be removed as it's just way too early. However if anyone wants to ask any questions, or if I have any progress updates, this thread is a good place for them.