This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - walter_j64bit
« on: September 19, 2018, 13:48:27 PM »
, Hurricane Florence
has frazzled my family and my nerves we lost power for two days we lost a surge protector all my devices that was on the surge protector are in working order
but the refrigerator wasn't on a surge protector so that's isn't working right
we had to get a replacement refrigerator. I'll be back on bjl dumpping soon.
« on: September 10, 2018, 02:15:42 AM »
LOL, hurricane Florence is on the way to the Carolina's,
Florence has got me just worried. All things Jag related are on hold.
I've got my Atari Lynx with the batter pack ready and I got my Sega Game Gear with the LED mod ready too.
I'll get my game on if things don't get too bad here in Goldsboro.
« on: September 06, 2018, 21:30:51 PM »
I've just PMed LinkoVitch my Jag is setup in the same way he has his Jag setup, he told me that my BJL Jag is having it's version of the "red screen" so my BJL Jag needs a cleaning but I'm not having any luck so far with dumping a rom
I'm thinking it might be the cables I'm using or my Jag just can't talk to my laptop.
Oh I've got my Laptop in working order I had to fdisk my Hard drive aka "SDcard" and reinstall win98 and this time I've installed Windows 2000. I've found out why windows Xp was running slow a mini PCi card is acting up time to do some more home work on this card.
« on: September 05, 2018, 03:21:34 AM »
Stone did this for me back in 2003.
This why your bjl works and mine don't,
too bad Stone isn't around any more his Jag know how is just awesome! Oh I've got more than one Jag kicking around here
I'm going try some things out I need to get my hands on the Jag os and put it back and try out the More Than Games bjl kit and see if that helps out, I'm going to check that link you post and see if I've missed anything.
« on: September 04, 2018, 23:08:24 PM »
OK, I've got my installed on the M model too, say when your BJL Rom is switched on can you run a Jag cart? I can't if a cart does run it only for a short time than the Jag crashes. What version of the BJL you're using? I've got 1.06.d.
« on: September 03, 2018, 17:52:17 PM »
IDK about the motherboard,
win 98 just hangs on boot up but when in safe mod win98 runs just fine
Xp is sluggish but any way, I think my Jag isn't talking to my laptop. What model Jag you got your bjl installed on a M model or a K model? Thanks.
« on: September 02, 2018, 22:37:04 PM »
Got my laptop running after fighting with it all day, I've checked the LPT1 port it seem to work but the laptop is running slow for some reason I've have no idea why.
I'll try to dump my romz tomorrow I need a brake from this laptop.
« on: August 31, 2018, 17:32:15 PM »
I've got the new motherboard, I'm putting it in the laptop. This is not my strong-point
"I do desktops"
I hope to have it all together soon, so I can get back to dumping the romz that I can't find on the information superhighway.
« on: August 27, 2018, 22:32:58 PM »
I've got a NOS replacement motherboard on the way and it didn't cost much just $15.70 with free shipping.
« on: August 27, 2018, 11:42:33 AM »
I might have to put my Jag dumping on hold, I think I've got a laptop with a gimp LPT1 port.
« on: August 24, 2018, 12:03:30 PM »
Can you take screen shots I'm a visual learner. Thanks!
« on: August 23, 2018, 20:31:57 PM »
No, luck I've let my Jag and PC run for 2 hours the countdown of kilobytes didn't show up.
I'm going to let the setup run over night to see if I can get anything.
« on: August 23, 2018, 11:09:49 AM »
OK, I'll try this out and I'll have to be patience.
I'm using Windows 98 with an AMD Duron @ 850 MHz and 512MB of ram.
It's a good thing I didn't fix up a 486 PC from the looks of things a PC running XP take some time to use the app I would hate to see the bjl dump running on a 486.
« on: August 23, 2018, 01:28:47 AM »
Ok, I've got my old laptop up and running thanks to a donor laptop I have, :-D anyway!
I want to use bjl dump but I'm unsure if I'm using it right. I've got the jag on the ready orange screen. so now I want to use the autodetection setup so is this the command "BJL_DUMP.EXE try.rom 0 800000 0" I'm right and how can I tell if it's working? :? Thanks!
« on: August 17, 2018, 01:45:33 AM »
That looks great! If I'm not mistaken, it was made using a 3D printer so were there any obstructions or extra material that needed sanding once it arrived? Heard that was a possibility. Thought about ordering one myself a while back but passed on it. Good to know they're actually selling
Yes it's 3D printed. I didn't do all that, I just called to my inner auto mechanic and had the cart together with in 5 minutes. https://www.youtube.com/watch?v=hLnFdYt4yZw